Lantech開箱機C-1000/2000/封箱機CS-300
暫無詳細介紹...
Lantech Case Erectors Make "Good Packages"!

Lantech case erectors always open your cases squarely, fold the flaps without overlapping where they meet at the middle, and apply the tape securely and evenly along the bottom centerline.

Our case erectors make square cases because:
1. The unique case pickup frame provides two-panel control of the case as it transitions from knock-down to open position.
2. The minor flaps are also folded while the case is stationary.
3. Unique slotted flap folders fold the major flaps while the case is stationary.

Cases that aren’t square are more difficult to fill manually, and can be impossible to fill with automatic packers. They resist going through automatic sealers, increasing the frequency of disruptive line stoppages. They are difficult to align properly at the corners when stacking, often resulting in a hazardous loss in stacking strength.

You Can Rely On Lantech Case Erectors Because They Don't Jam!

Jams are the number one cause of disruptive downtime for case erectors:
1. Powered magazine consistently delivers blanks to proper pickup (feed) position.
2. Pickup frame provides positive control of case and overcome manufacturing variations in the cases.
3. Bottom flaps are folded while the case is held stationary in the pickup frame .

All Lantech case erectors are supported by the Industry’s best global service network.

Lantech case erectors erect and seal a wide variety of case types including:
1. HSC and RSC
2. B and C flute
3. Single wall
   Specs / Pricing


C-300

Performance Criteria
Throughput Speed 10 cases per minute
Case Size Minimum (Outside Diameter) 7 7/8" L
5 7/8" W
5 7/8" H
Case Size Maximum (Outside Diameter) 19 5/8" L
13 3/4" W
23 1/2" H
** Minimum and maximum case heights vary depending on box width.


Case Criteria
Case Types RSC, HSC
Flute Types B, C
Wall Types Single wall


Bottom Seal
Standard Method Tape
Standard Tape Head Lantech TH-Series


Service Requirements
Air Supply 80 psi, 8 cfm, clean dry air
Electrical Supply 230v, 3 phase, 15amp, 60Hz


Machine Data
Infeed Capacity 150 cases (approximate)
Weight 1,300 lbs
Dimensions 88" x 85" x 59" mm (L x W x H)
Outfeed Pass Height 22 1/2" minimum
24 3/4" maximum


Warranty

3 years
Unlimited Cycles










Lantech Case Erectors create "good packages" by squaring up the case (90 degree corners) where the bottom flaps meet evenly without overlapping, and the sealing tape is applied evenly and has equal “legs” on the side of the box.

Cases that aren’t “square” are hard to pack, resist going through automatic sealers, don’t stack well (hard to align – stacking strength comes from corner alignment), and don’t look good. Our case erectors make square cases because:

1. The pickup frame provides two-panel control of the case as it transitions from knock-down to open position.
2. Unique slotted flap folders fold the major flaps while the case is stationary.
3. The minor flaps are also folded while the case is stationary.
4. Industry’s best service network and call center

You can rely on Lantech Case Erectors because they don't jam! Jams are the number one cause of downtime for case erectors.

1. Powered magazine consistently delivers blanks to proper pickup (feed) position.
2. Pickup frame provides positive control of case and overcome manufacturing variations in the cases.
3. All flaps are folded while the case is held square by the pickup frame and before it moves into the side belts.

Lantech Case Erectors erect and seal a wide variety of applications which include:
-HSC and RSC cases
-B and C flute
-single wall
   Specs / Pricing



C-1000
:
(Tape) (Hotmelt)

Performance Criteria
Throughput Speed 15 cpm*
*up to 25 cpm with purchase
of add'l options
Case Size Minimum (Outside Diameter) 7 7/8" L
5 7/8" W
5 7/8" H
Case Size Maximum (Outside Diameter) 19 3/4" L
12 3/4" W
20 1/4" H
** Minimum and maximum case heights vary depending on box width.


Case Criteria
Case Types RSC, HSC
Flute Types B, C
Wall Types Single wall
(test for double wall)


Bottom Seal
Standard Method Tape
Standard Tape Head Lantech TH-Series


Service Requirements
Air Supply 80 psi, 4-13 cfm
Electrical Supply 230v, 3 phase, 15amp, 60Hz


Machine Data
Infeed Capacity 200 cases
Weight 1,610 lbs
Dimensions 90" x 90" x 71"
(L x W x H)
Outfeed Pass Height 22.5" minimum
24.75" maximum


Warranty
3 years
Unlimited Cycles






Setting New Standards. Lantech has always stood for cutting edge innovation and our C-Series case sealers continue that tradition. We've set new standards for productivity and efficiency in low speed case sealing applications.

If you want to automate the process of sealing cases or want to simply upgrade or replace older equipment, you'll want to take a look at the many advantages we offer for your operation.

Voted BEST BRAND in Stretch Wrapping Systems by readers of Industrial Equipment News.
   Specs / Pricing


CS-300

Performance Criteria
Throughput Speed Up to 25 cases per minute
Case Size Minimum (Outside Diameter) 7 7/8" Length
5 7/8" Width
4 3/4" Height
Case Size Maximum (Outside Diameter) 25 1/2" Length
17 3/4" Width
19 5/8" Height


Machine Data
Shipping Weight 1400 lbs
Dimensions 78" Length
35" Width


Service Requirement
Electric 230v, 3ph, 15amp, 60Hz
Pneumatic 80 psi, clean dry air


Warranty
3 years
Unlimited cycles
CopyRight©新疆18选7图表 新疆18选7图表ShingPack
TEL:021-5108 7378     FAX:021-5107 9558    Service Hotline: 400 8855 021
Add:4788-188 Baoan Highway Anting Industrial Pack Shanghai City  新疆18选7图表